 |
         |
|
|
|
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Part Name -- Heater Test Stand |
||
|---|---|---|
| Name: | Heater Test Stand | |
| Category: | Other Products | |
| Photo(s): | Heater | |
| NATO Stock Number (NSN): | 4910-01-318-4508
(VHTS-89-102) 4910-21-884-1191 (VHTS-81-001) |
|
| Features: | * Test
or troubleshoot 30 different heaters * Fuel supply system and electrical control system in one unit * Most accessories provided * Operated from 24 VDC or 120/240 VAC, 50/60 Hz * Voltmeter, ammeter, temperature meter, continuity tester and other diagnostic aids provided |
|
| Description: |
The heater test stand (HTS) is a portable unit enclosed in an aluminum chest assembly. The chest assembly is removed to reveal the actual HTS unit inside. The HTS was designed to allow convenient operation and troubleshooting of heaters on top of a standard workbench with no permanent mounting required. The following items are included with the HTS:
The following diagnostic aids provided are:
The fuel system includes a fuel tank to contain diesel fuel or JP-8 for use during testing. The electrical control system controls the operation of the heater, the fuel pump and the solenoid valve. Operation of the heater using HTS is identical to operating the heater using the electrical control system in the vehicle. The HTS is supplied with all heater fuel inlet adapters, fuel lines, cable assemblies and exhaust adapters required for testing the heaters. All ancillary items are stored in either the built-in or removable partitioned trays in the chest assembly. |
|
| Operation Requirements: |
The operator must provide exhaust disposal facilities which fit the exhaust adapters provided. Any flexible metal tubing attached to these adapters must meet the exhaust requirements of the heater under test. In order to test the engine coolant heaters, the operator must provide a coolant reservoir filled with the appropriate coolant, the appropriate size inside diameter radiator hoses and clamps for the coolant circuit. A coolant circulation pump may also be required for the test. To operate the heater, mount the heater on the HTS using the mounting brackets provided. Interconnect the HTS to the heater's fuel and electrical systems and connect the exhaust and coolant systems using the accessories provided. Operate the heater using the same starting procedures found in the heater operator's manual. |
|
| Notes: | 1.
NATO Stock Number 4910-01-318-4508 2. Specifications subject to change without notice. |
|
|
Heater Testing Capability |
||
| HTS Model | Heater Type | Heater Model Number |
| VHTS-95-090 | Webasto Teleflex Canada |
HL-10011.A05,
HL-10011.11, DBW2020 P/N 825129 |
| VHTS-89-102 | Hupp Stewart - Warner |
MF60A,
MF60B, MF60B2, MF510A, MF510B, MF510C 10530A, 10530B, 10560G, 10560C, 10560M, 10560M24B1, 10560M24B2, 939-J24 |
| Benmar | CP-3050, AP-3050 | |
| Global Thermoelectric | A20 |
|
| VHTS-81-001 | Stewart
- Warner Perfection Hunter Webasto |
939J24,
1030-CC-24, 10530A-24, 978MH-24 MF500, MF510 UH-49-8-M-CAN HL-5001.45, W12002.67 |
|
Equipment Data |
||
| Case Dimensions | Length
-- 32 in (813 mm) Height -- 25 in (635 mm) Width -- 19 in (483 mm) Weight -- 146 lbs (66 Kg) |
|
| Electrical Requirements | +24 VDC (30 Amp min) or 120/240 VAC, 50/60 Hz, Single phase | |
| Environmental Limits | Operating
temperature range: 32°F to 100°F (0°C to 38°C) Storage temperature range: -55°F to 160°F (-48°C to 71°C) |
|
| Shock | 2 drops from 12 inches onto concrete floor | |
| Vibration | MIL-STD-810E, Method 514.4, Category 1 | |
| Fuel Tank Capacity | 2 U.S. quarts (2.3 litres) | |
|
|
|
| Home | About us | Contact Us | Frequently Asked Questions | Search | Site Map | What's New | |
|
|
|
| Send mail to enquiries@valcom-guelph.com with questions or comments about any of the products or services found on this web site. |
 |
|
|
|
| ©2006 All information and materials contained within are the property of Valcom Manufacturing Group Inc.. | |
